Professional Zynq UltraScale+ MPSoC
This 5-day course will enable the embedded software developer to get the best possible start on software development for the Zynq™ UltraScale+™ MPSoC family.
The Power Workshop is a combination of »Compact Zynq UltraScale+ MPSoC for the Hardware Designer« and »Compact Zynq UltraScale+ MPSoC for the Software Designer« and provides the necessary and in-depth knowledge to understand the entire embedded design cycle for the Zynq™ UltraScale+™ MPSoC and to safely apply the necessary tools. The workshop first explains the Zynq™ UltraScale+™ hardware configuration and then the unified Vitis™ tool suite for the embedded software development. Symmetric and asymmetric OS support, opensource Linux kernel and rootfs build using Yocto and/or PetaLinux, FreeRTOS usage for the realtime processing unit, hypervisor architecture and software support and at least mechanisms of individual boot configurations are shown and elaborated in exercises. Debugging in simulation supported by QEMU or debugging on hardware targets-both are important integral parts of methodology. While multiple processors in the UltraScale+™ MPSoC architecture are typically not running simultaneously in full performance mode, the power management of resources is software programmable and so enables power reduction in the runtime system.
The last module focuses on boot loading and the flash image build.
Due to accompanying exercises, the course offers in-depth and practice-oriented training. Attendees of the online live training will perform the practical exercises in real time with instructor assistance.
Course language: English
Contact
Michael Schwarz
+49 7664 91313-15
Details
Applicable technologies
AMD Zynq™ UltraScale+™ MPSoC and RFSoC,Kria™ SoMs
Requirements
Basic knowledge of the programming language CGood understanding of digital embedded systems
Duration
5 daysFee (net per person)
€ 2,800Inclusive
Training materialAgenda
01
Embedded UltraFast™ design methodology
02
Overview of embedded hardware development
03
Driving the IP integrator tool
04
Driving the Vitis™ tool
05
Zynq™ UltraScale+™ MPSoC architecture
06
The Arm® processing units APU and RPU
07
Creating user peripherals based on AXI
08
Baremetal software platform development
09
Arm® TrustZone® technology
10
Zynq™ UltraScale+™ MPSoC hardwaresoftware virtualization
11
Linux application development and debugging
12
Deploying OpenAMP in a heterogeneous system
13
Linux builds using PetaLinux and Yocto
14
Understanding device drivers
15
FreeRTOS
16
Zynq™ UltraScale+™ MPSoC software stack
17
Platform Management Unit (PMU) development
18
Power management using the PMU
19
Zynq™ UltraScale+™ MPSoC boot and configuration
Dates
Professional Zynq UltraScale+ MPSoC
OL
Online
Dec 02, 2024
Professional Zynq UltraScale+ MPSoC
OL
Online
Mar 24, 2025
Professional Zynq UltraScale+ MPSoC
OL
Online
Jun 23, 2025
Professional Zynq UltraScale+ MPSoC
OL
Online
Sep 15, 2025
Professional Zynq UltraScale+ MPSoC
OL
Online
Dec 08, 2025
Available formats for this training
This might also interest you...
Course | Format | Category | Location | Duration | Date | |
---|---|---|---|---|---|---|
Advanced Zynq UltraScale+ MPSoC for the Hardware Designer |
OL (Online Live) |
Embedded for AMD (Adaptive) SoCs & MPSoCs |
Online |
3 days |
Dec 16, 2024 |
Info |
Advanced Zynq UltraScale+ MPSoC for the Hardware Designer |
OL (Online Live) |
Embedded for AMD (Adaptive) SoCs & MPSoCs |
|
3 days |
all year on request |
Info |
Advanced Zynq UltraScale+ MPSoC for the Hardware Designer |
WO (Workshop) |
Embedded for AMD (Adaptive) SoCs & MPSoCs |
Stuttgart |
3 days |
Dec 16, 2024 |
Info |
Advanced Zynq UltraScale+ MPSoC for the Hardware Designer |
WO (Workshop) |
Embedded for AMD (Adaptive) SoCs & MPSoCs |
|
3 days |
all year on request |
Info |
Compact Embedded Linux |
OL (Online Live) |
Embedded for AMD (Adaptive) SoCs & MPSoCs |
|
3 days |
all year on request |
Info |
Compact Embedded Linux |
WO (Workshop) |
Embedded for AMD (Adaptive) SoCs & MPSoCs |
|
3 days |
all year on request |
Info |
Professional FPGA Circuit Design Technique |
OL (Online Live) |
Development |
Online |
5 days |
Feb 10, 2025 |
Info |
Professional FPGA Circuit Design Technique |
OL (Online Live) |
Development |
Online |
5 days |
Apr 07, 2025 |
Info |
Professional FPGA Circuit Design Technique |
OL (Online Live) |
Development |
Online |
5 days |
Jul 07, 2025 |
Info |
Professional FPGA Circuit Design Technique |
OL (Online Live) |
Development |
Online |
5 days |
Nov 03, 2025 |
Info |
Professional FPGA Circuit Design Technique |
PW (Power Workshop) |
Development |
Freiburg |
5 days |
Feb 10, 2025 |
Info |
Professional FPGA Circuit Design Technique |
PW (Power Workshop) |
Development |
Freiburg |
5 days |
Apr 07, 2025 |
Info |
Professional FPGA Circuit Design Technique |
PW (Power Workshop) |
Development |
Freiburg |
5 days |
Jul 07, 2025 |
Info |
Professional FPGA Circuit Design Technique |
PW (Power Workshop) |
Development |
Freiburg |
5 days |
Nov 03, 2025 |
Info |
Professional Vivado |
OL (Online Live) |
Development |
Online |
5 days |
Mar 10, 2025 |
Info |
Professional Vivado |
OL (Online Live) |
Development |
Online |
5 days |
Jul 07, 2025 |
Info |
Professional Vivado |
OL (Online Live) |
Development |
Online |
5 days |
Oct 20, 2025 |
Info |
Professional Vivado |
OL (Online Live) |
Development |
Online |
5 days |
Dec 01, 2025 |
Info |
Professional Vivado |
PW (Power Workshop) |
Development |
Freiburg |
5 days |
Dec 09, 2024 |
Info |
Professional Vivado |
PW (Power Workshop) |
Development |
Freiburg |
5 days |
Mar 10, 2025 |
Info |
Professional Vivado |
PW (Power Workshop) |
Development |
Frankfurt / Main |
5 days |
Jul 07, 2025 |
Info |
Professional Vivado |
PW (Power Workshop) |
Development |
Freiburg |
5 days |
Oct 20, 2025 |
Info |
Professional Vivado |
PW (Power Workshop) |
Development |
Frankfurt / Main |
5 days |
Dec 01, 2025 |
Info |
showing: 1 to 2 (2)
|
How can we help?
Contact
FAQ
01. Can you help me with reserving the room?
If you need a room for a face-to-face course, please contact us. We will support you in choosing suitable accommodation.
02. What times in the day do courses start and end?
Our face-to-face courses start daily at 9 a.m. (CET/CEST) and end at 5 p.m., with two coffee breaks and an extended lunch break. The total course time per day is 6 hours. For online courses, the start is also at 9 a.m. (CET/CEST), but they end at 2:30 p.m.. The total course time per day is 4 and a half hours plus breaks.
03. Are course materials provided?
All participants of paid courses will receive English training materials in electronic or paper form.
04. Will I receive a course certificate?
Each participant of a paid PLC2 course will receive a signed certificate of attendance at the end of the course.
05. Can I pay with Training Credits (TCs)?
Of course, you can also pay for your training using your available TCs (Training Credits). We will then invoice AMD directly. If you do not have sufficient credit for the booked training, the difference can be paid for with an additional payment. The additional charge will be invoiced directly to you.
06. What are the options for payment?
You can pay us via bank transfer or with TCs (Training Credits). Unfortunately, payment via debit, credit card, or PayPal is not possible.
07. What is the deadline for payment?
Payment is due 14 days after the invoice date, without deduction. Please transfer the amount within that time.
08. What are the options for cancelling?
You can cancel free of charge up to 14 days before the course starts. If you have to cancel at short notice due to illness or other reasons, you have the option of adding a substitute participant or of making up the course at a later date (within 6 months).
09. When will I receive a firm commitment as to whether the course will take place?
You will receive binding confirmation 7 days before the course begins as to whether it will go ahead.
10. How many participants are required for a course to be given/what is the minimum number of participants?
We generally offer courses for 5 or more people. That means that if you would like to book a course at your premises, you need 5 people to register or need to pay the amount for 5 participants, even if fewer people attend.
11. Can I book a course that is given in English?
If you need a course that is officially advertised as given in German to be given in English, please contact us. We will try to make that possible for you.
12. What language is the course in?
Our webinars and online courses are conducted in English. All our F2F training courses are generally conducted in German. Feel free to contact us if you need face-to-face training in English or online training in German.