Menu

Advanced Zynq UltraScale+ MPSoC for the Hardware Designer

Workshop


Online Live

This 3-day course provides both the tool- and architecture- specific aspects necessary for development with the AMD Zynq™ UltraScale+™ MPSoC device.

The focus of this course is on embedded hardware development with the AMD Vivado™ tool using the IP-Integrator, including software development using the Vitis™ tool. The overall architecture of the Zynq™ UltraScale+™ MPSoC Processing System (PS) is discussed in detail to understand the architecture in the silicon processing system that interfaces to the Programmable Logic (PL). The APU includes the Arm® Cortex®-A53 cores, the RPU includes the Cortex™-R5F cores, and the PMU includes a MicroBlaze™ system. And it will be necessary to protect and isolate accesses in a system of shared peripherals and memory if MPSoC-based designs are running simultaneously. For this connection of AXI-based IPs in the Programmable Logic (PL) to the Processing System (PS), it is essential to understand the AXI protocol with features like coherency management and virtual system management. The final section of this course includes platform management, power management, and inter-processor-interrupt concepts.

Due to accompanying exercises, the course offers in-depth and practice-oriented training. Attendees of the online live course will do the practical exercises in the afternoon on their own.

Course language: German (English possible on request)

Portrait von Michael Schwarz

Contact

Michael Schwarz

+49 7664 91313-15

michael.schwarz@plc2.de

Details

Applicable technologies

AMD Zynq™ UltraScale+™ MPSoC and RFSoC,
Kria™ SoMs

Requirements

Basic knowledge of digital system architectures
Basic knowledge in VHDL or Verilog language and C/C++ is an advantage

Duration

3 days

Fee (net per person)

€ 2,300

Inclusive

Training material
Plus beverages during breaks
Lunch

Agenda

01

The Arm® APU: Cortex®-A53 processor

02

The Arm® RPU: Cortex®-R5F processor

03

The Zynq™ MPSoC system architecture

04

64-bit and 32-bit architecture features

05

Cache coherency management

06

Hypervisors introduction

07

Virtualization hardware support

08

On-chip memories and its architecture

09

Boot configuration and boot image creation

10

System memory management

11

Peripheral and memory protection

12

Zynq™ UltraScale+™ MPSoC clocking and PS resets

13

AXI variations and transactions

14

The Platform Management Unit (PMU)

15

Power management using the PMU

16

Inter Processor Interrupts (IPI)

Dates

Advanced Zynq UltraScale+ MPSoC for the Hardware Designer

WO

Berlin

Jun 12, 2024

Book now

Advanced Zynq UltraScale+ MPSoC for the Hardware Designer

WO

Frankfurt / Main

Sep 25, 2024

Book now

Advanced Zynq UltraScale+ MPSoC for the Hardware Designer

WO

Stuttgart

Dec 16, 2024

Book now

Booking

DE EN

Company

Contact Person

Request / Offer

Billing Address

Billing Person

Participant(s)

Fee

Participant

 

€ 2,300

Course

Advanced Zynq UltraScale+ MPSoC for the Hardware Designer_WO

Total fee

€ 2,300

*Required field

Unternehmen

Ansprechpartner:in

Anfrage / Angebot

Rechnungsanschrift

Ansprechpartner:in

Teilnehmer:innnen

Kosten

Teilnehmer:in

 

€ 2,300

Kurs

Advanced Zynq UltraScale+ MPSoC for the Hardware Designer_WO

Gesamtbetrag

€ 2,300

*Pflichtfeld

This might also interest you...

Course Format Category Location Duration Date

Professional Zynq UltraScale+ MPSoC

OL (Online Live)

Embedded for AMD (Adaptive) SoCs & MPSoCs

Online

5 days

Dec 02, 2024

Info

Embedded Architecture Vivado Vitis MPSoC Cortex-A53 Cortex-R5 Processor Cache Coherency Hypervisor PetaLinux Protection PCIe PS PMU Power IP-Integrator AXI ACE Vitis

Professional Zynq UltraScale+ MPSoC

PW (Power Workshop)

Embedded for AMD (Adaptive) SoCs & MPSoCs

Frankfurt / Main

5 days

Jun 03, 2024

Info

Embedded Architecture Vivado Vitis MPSoC Cortex-A53 Cortex-R5 Processor Cache Coherency Hypervisor PetaLinux Protection PCIe PS PMU Power IP-Integrator AXI ACE Vitis

Professional Zynq UltraScale+ MPSoC

PW (Power Workshop)

Embedded for AMD (Adaptive) SoCs & MPSoCs

Freiburg

5 days

Sep 16, 2024

Info

Embedded Architecture Vivado Vitis MPSoC Cortex-A53 Cortex-R5 Processor Cache Coherency Hypervisor PetaLinux Protection PCIe PS PMU Power IP-Integrator AXI ACE Vitis

Professional Zynq UltraScale+ MPSoC

PW (Power Workshop)

Embedded for AMD (Adaptive) SoCs & MPSoCs

Frankfurt / Main

5 days

Dec 02, 2024

Info

Embedded Architecture Vivado Vitis MPSoC Cortex-A53 Cortex-R5 Processor Cache Coherency Hypervisor PetaLinux Protection PCIe PS PMU Power IP-Integrator AXI ACE Vitis

Compact Zynq UltraScale+ MPSoC for the Hardware Designer

OL (Online Live)

Embedded for AMD (Adaptive) SoCs & MPSoCs

Online

3 days

Jul 15, 2024

Info

Embedded Architecture Vivado Vitis MPSoC Cortex-A53 Cortex-R5 Processor Cache Coherency Peripheral PS PMU AXI Power IP-Integrator ACE

Compact Zynq UltraScale+ MPSoC for the Hardware Designer

OL (Online Live)

Embedded for AMD (Adaptive) SoCs & MPSoCs

Online

3 days

Oct 14, 2024

Info

Embedded Architecture Vivado Vitis MPSoC Cortex-A53 Cortex-R5 Processor Cache Coherency Peripheral PS PMU AXI Power IP-Integrator ACE

Compact Zynq UltraScale+ MPSoC for the Hardware Designer

WO (Workshop)

Embedded for AMD (Adaptive) SoCs & MPSoCs

Freiburg

3 days

May 06, 2024

Info

Embedded Architecture Vivado Vitis MPSoC Cortex-A53 Cortex-R5 Processor Cache Coherency Peripheral PS PMU AXI Power IP-Integrator ACE

Compact Zynq UltraScale+ MPSoC for the Hardware Designer

WO (Workshop)

Embedded for AMD (Adaptive) SoCs & MPSoCs

Berlin

3 days

Aug 20, 2024

Info

Embedded Architecture Vivado Vitis MPSoC Cortex-A53 Cortex-R5 Processor Cache Coherency Peripheral PS PMU AXI Power IP-Integrator ACE

Compact Zynq UltraScale+ MPSoC for the Hardware Designer

WO (Workshop)

Embedded for AMD (Adaptive) SoCs & MPSoCs

Munich

3 days

Nov 25, 2024

Info

Embedded Architecture Vivado Vitis MPSoC Cortex-A53 Cortex-R5 Processor Cache Coherency Peripheral PS PMU AXI Power IP-Integrator ACE

AXI Interface Technology

OL (Online Live)

Connectivity

Online

2 days

Apr 22, 2024

Info

FPGA AXI Interface Protocoll Protocol AMBA stream streaming lite full valid ready channels interconnect latency interface bus connectivity optimization sharing DDRAM performance

AXI Interface Technology

OL (Online Live)

Connectivity

Online

2 days

Aug 01, 2024

Info

FPGA AXI Interface Protocoll Protocol AMBA stream streaming lite full valid ready channels interconnect latency interface bus connectivity optimization sharing DDRAM performance

AXI Interface Technology

OL (Online Live)

Connectivity

Online

2 days

Dec 09, 2024

Info

FPGA AXI Interface Protocoll Protocol AMBA stream streaming lite full valid ready channels interconnect latency interface bus connectivity optimization sharing DDRAM performance

AXI Interface Technology

WO (Workshop)

Connectivity

Frankfurt / Main

2 days

Jun 26, 2024

Info

FPGA AXI Interface Protocoll Protocol AMBA stream streaming lite full valid ready channels interconnect latency interface bus connectivity optimization sharing DDRAM performance

AXI Interface Technology

WO (Workshop)

Connectivity

Berlin

2 days

Sep 09, 2024

Info

FPGA AXI Interface Protocoll Protocol AMBA stream streaming lite full valid ready channels interconnect latency interface bus connectivity optimization sharing DDRAM performance

AXI Interface Technology

WO (Workshop)

Connectivity

Munich

2 days

Nov 28, 2024

Info

FPGA AXI Interface Protocoll Protocol AMBA stream streaming lite full valid ready channels interconnect latency interface bus connectivity optimization sharing DDRAM performance

showing: 1 to 2 (2)

How can we help?

Contact

FAQ

01. Can you help me with reserving the room?

If you need a room for a face-to-face course, please contact us. We will support you in choosing suitable accommodation.

02. What times in the day do courses start and end?

Our face-to-face courses start daily at 9 a.m. (CET/CEST) and end at 5 p.m., with two coffee breaks and an extended lunch break. The total course time per day is 6 hours. For online courses, the start is also at 9 a.m. (CET/CEST), but they end at 2:30 p.m.. The total course time per day is 4 and a half hours plus breaks.

03. Are course materials provided?

All participants of paid courses will receive English training materials in electronic or paper form.

04. Will I receive a course certificate?

Each participant of a paid PLC2 course will receive a signed certificate of attendance at the end of the course.

05. Can I pay with Training Credits (TCs)?

Of course, you can also pay for your training using your available TCs (Training Credits). We will then invoice AMD directly. If you do not have sufficient credit for the booked training, the difference can be paid for with an additional payment. The additional charge will be invoiced directly to you.

06. What are the options for payment?

You can pay us via bank transfer or with TCs (Training Credits). Unfortunately, payment via debit, credit card, or PayPal is not possible.

07. What is the deadline for payment?

Payment is due 14 days after the invoice date, without deduction. Please transfer the amount within that time.

08. What are the options for cancelling?

You can cancel free of charge up to 14 days before the course starts. If you have to cancel at short notice due to illness or other reasons, you have the option of adding a substitute participant or of making up the course at a later date (within 6 months).

09. When will I receive a firm commitment as to whether the course will take place?

You will receive binding confirmation 7 days before the course begins as to whether it will go ahead.

10. How many participants are required for a course to be given/what is the minimum number of participants?

We generally offer courses for 5 or more people. That means that if you would like to book a course at your premises, you need 5 people to register or need to pay the amount for 5 participants, even if fewer people attend.

11. Can I book a course that is given in English?

If you need a course that is officially advertised as given in German to be given in English, please contact us. We will try to make that possible for you.

12. What language is the course in?

Our webinars and online courses are conducted in English. All our F2F training courses are generally conducted in German. Feel free to contact us if you need face-to-face training in English or online training in German.