Menu

Essentials of Microprocessors

Workshop


Online Live

Learn what makes microprocessors tick!
This class offers insights into all major aspects of microprocessors, from registers through coprocessors and everything in between.
Differences between RISC and CISC architectures are explored, as well as the concept of interrupts. A generic microprocessor is programmed and run in simulation to reinforce the principles learned in the lecture modules. The attendee will leave the class well-prepared for embedded classes like »Compact Zynq UltraScale+ MPSoC for the Hardware Designer« or »Compact Zynq UltraScale+ MPSoC for the Software Designer« and training classes around the AMD Zynq™ technology.

Due to accompanying exercises, the course offers in-depth and practice-oriented training.

Course language: German (English possible on request)

Portrait von Michael Schwarz

Contact

Michael Schwarz

+49 7664 91313-15

michael.schwarz@plc2.de

Details

Applicable technologies

AMD FPGAs and adaptive SoCs,
Kria™ SoMs

Requirements

Basic knowledge in VHDL
Basic knowledge of digital design techniques

Duration

1 day

Fee (net per person)

€ 800

Inclusive

Training material
Plus beverages during breaks
Lunch

Agenda

01

Generic microprocessor architectures

02

Generic assembly language

03

Programming the generic microprocessor

04

Interrupt management and handler

05

Interfacing with memory

06

Advanced microprocessor features

07

Processor architecture comparison

Dates

Essentials of Microprocessors

WO

all year on request

Book now

Booking

DE EN

Company

Contact Person

Request / Offer

Billing Address

Billing Person

Participant(s)

Fee

Participant

 

€ 800

Course

Essentials of Microprocessors_WO

Total fee

€ 800

*Required field

Unternehmen

Ansprechpartner:in

Anfrage / Angebot

Rechnungsanschrift

Ansprechpartner:in

Teilnehmer:innnen

Kosten

Teilnehmer:in

 

€ 800

Kurs

Essentials of Microprocessors_WO

Gesamtbetrag

€ 800

*Pflichtfeld

This might also interest you...

Course Format Category Location Duration Date

Compact Zynq 7000 SoC for the Hardware Designer

OL (Online Live)

Embedded for AMD (Adaptive) SoCs & MPSoCs

3 days

all year on request

Info

Embedded Architecture Vivado Vitis Zynq SoC Platform Hardware C AXI

Compact Zynq 7000 SoC for the Hardware Designer

WO (Workshop)

Embedded for AMD (Adaptive) SoCs & MPSoCs

3 days

all year on request

Info

Embedded Architecture Vivado Vitis Zynq SoC Platform Hardware C AXI

AXI Interface Technology

OL (Online Live)

Connectivity

Online

2 days

Aug 01, 2024

Info

FPGA AXI Interface Protocoll Protocol AMBA stream streaming lite full valid ready channels interconnect latency interface bus connectivity optimization sharing DDRAM performance

AXI Interface Technology

OL (Online Live)

Connectivity

Online

2 days

Dec 09, 2024

Info

FPGA AXI Interface Protocoll Protocol AMBA stream streaming lite full valid ready channels interconnect latency interface bus connectivity optimization sharing DDRAM performance

AXI Interface Technology

WO (Workshop)

Connectivity

Berlin

2 days

Sep 09, 2024

Info

FPGA AXI Interface Protocoll Protocol AMBA stream streaming lite full valid ready channels interconnect latency interface bus connectivity optimization sharing DDRAM performance

AXI Interface Technology

WO (Workshop)

Connectivity

Munich

2 days

Nov 28, 2024

Info

FPGA AXI Interface Protocoll Protocol AMBA stream streaming lite full valid ready channels interconnect latency interface bus connectivity optimization sharing DDRAM performance

showing: 1 to 2 (2)

How can we help?

Contact

FAQ

01. Can you help me with reserving the room?

If you need a room for a face-to-face course, please contact us. We will support you in choosing suitable accommodation.

02. What times in the day do courses start and end?

Our face-to-face courses start daily at 9 a.m. (CET/CEST) and end at 5 p.m., with two coffee breaks and an extended lunch break. The total course time per day is 6 hours. For online courses, the start is also at 9 a.m. (CET/CEST), but they end at 2:30 p.m.. The total course time per day is 4 and a half hours plus breaks.

03. Are course materials provided?

All participants of paid courses will receive English training materials in electronic or paper form.

04. Will I receive a course certificate?

Each participant of a paid PLC2 course will receive a signed certificate of attendance at the end of the course.

05. Can I pay with Training Credits (TCs)?

Of course, you can also pay for your training using your available TCs (Training Credits). We will then invoice AMD directly. If you do not have sufficient credit for the booked training, the difference can be paid for with an additional payment. The additional charge will be invoiced directly to you.

06. What are the options for payment?

You can pay us via bank transfer or with TCs (Training Credits). Unfortunately, payment via debit, credit card, or PayPal is not possible.

07. What is the deadline for payment?

Payment is due 14 days after the invoice date, without deduction. Please transfer the amount within that time.

08. What are the options for cancelling?

You can cancel free of charge up to 14 days before the course starts. If you have to cancel at short notice due to illness or other reasons, you have the option of adding a substitute participant or of making up the course at a later date (within 6 months).

09. When will I receive a firm commitment as to whether the course will take place?

You will receive binding confirmation 7 days before the course begins as to whether it will go ahead.

10. How many participants are required for a course to be given/what is the minimum number of participants?

We generally offer courses for 5 or more people. That means that if you would like to book a course at your premises, you need 5 people to register or need to pay the amount for 5 participants, even if fewer people attend.

11. Can I book a course that is given in English?

If you need a course that is officially advertised as given in German to be given in English, please contact us. We will try to make that possible for you.

12. What language is the course in?

Our webinars and online courses are conducted in English. All our F2F training courses are generally conducted in German. Feel free to contact us if you need face-to-face training in English or online training in German.