Compact UltraScale: High-Speed Memory Interfacing
This course targets to hardware designers, as well as to system architects and layout designers, who want to implement DDR4 interfaces in a system successfully.
The workshop starts with a comparison between DDR3 and DDR4 memories. The DDR4 enhancements are discussed together with the new features and operational details of DDR4 memories. All design steps are described: DDR4 design generation, functional simulation, and implementation. The design will be tested on real hardware. The special focus is on the physical layer – signal integrity. Parameters for signal quality and timing are covered. Practical design and verification examples are discussed. Simulation options on PCB level are described and demonstrated during exercises. The attendees will learn how to derive design rules for the PCB design. Methodical tips and tricks complete the content.
During the training, the target technology will be the Kintex™ UltraScale™ FPGA KCU105 evaluation board.
Due to accompanying exercises, the course offers in-depth and practice-oriented training. Attendees of the online live training will perform the practical exercises in real time with instructor assistance.
Course language: English
Contact
Michael Schwarz
+49 7664 91313-15
Details
Applicable technologies
All AMD UltraScale™ FPGA/MPSoC/RFSoC architectures
Requirements
Knowledge of Vivado™ design tool flowBasic knowledge of FPGA technology
Duration
3 daysFee (net per person)
€ 1,900Inclusive
Training materialAgenda
01
Memory devices
02
Memory interface resources
03
Memory interface controller architecture and signals
04
MIG Wizard
05
DDR4 interface simulation
06
DDR4 interface implementation
07
DDR4 interface test and debugging
08
Board level design
09
PS memory controller
10
IBIS and SI tools
11
Memory interface PCB simulation
12
Exercises:
01. DDR4 IP customization
02. DDR4 IP simulation
03. DDR4 IP implementation
04. DDR4 IP debugging
05. Designing a PS memory interface
06. Memory interface PCB simulation
Dates
Compact UltraScale: High-Speed Memory Interfacing
OL
all year on request
This might also interest you...
| Course | Format | Category | Location | Duration | Date | |
|---|---|---|---|---|---|---|
|
Compact UltraScale: Serial Transceivers |
OL (Online Live) |
Connectivity |
Online |
3 days |
Nov 18, 2024 |
Info |
|
Compact UltraScale: Serial Transceivers |
WO (Workshop) |
Connectivity |
Frankfurt / Main |
3 days |
Sep 23, 2024 |
Info |
|
Compact Versal Adaptive SoC: Connectivity |
OL (Online Live) |
Connectivity |
Online |
3 days |
Oct 07, 2024 |
Info |
|
Compact Versal Adaptive SoC: Connectivity |
WO (Workshop) |
Connectivity |
Frankfurt / Main |
3 days |
Nov 04, 2024 |
Info |
|
Compact UltraScale: Integrated PCI Express Systems |
OL (Online Live) |
Connectivity |
Online |
3 days |
Nov 11, 2024 |
Info |
|
Compact UltraScale: Integrated PCI Express Systems |
WO (Workshop) |
Connectivity |
Berlin |
3 days |
Dec 02, 2024 |
Info |
|
Designing with Ethernet MAC Controllers |
OL (Online Live) |
Connectivity |
Online |
2 days |
Nov 13, 2024 |
Info |
|
Designing with Ethernet MAC Controllers |
WO (Workshop) |
Connectivity |
Freiburg |
2 days |
Nov 21, 2024 |
Info |
|
showing: 1 to 2 (2)
|
||||||
How can we help?
Contact
FAQ
01. Can you help me with reserving the room?
If you need a room for a face-to-face course, please contact us. We will support you in choosing suitable accommodation.
02. What times in the day do courses start and end?
Our face-to-face courses start daily at 9 a.m. (CET/CEST) and end at 5 p.m., with two coffee breaks and an extended lunch break. The total course time per day is 6 hours. For online courses, the start is also at 9 a.m. (CET/CEST), but they end at 2:30 p.m.. The total course time per day is 4 and a half hours plus breaks.
03. Are course materials provided?
All participants of paid courses will receive English training materials in electronic or paper form.
04. Will I receive a course certificate?
Each participant of a paid PLC2 course will receive a signed certificate of attendance at the end of the course.
05. Can I pay with Training Credits (TCs)?
Of course, you can also pay for your training using your available TCs (Training Credits). We will then invoice AMD directly. If you do not have sufficient credit for the booked training, the difference can be paid for with an additional payment. The additional charge will be invoiced directly to you.
06. What are the options for payment?
You can pay us via bank transfer or with TCs (Training Credits). Unfortunately, payment via debit, credit card, or PayPal is not possible.
07. What is the deadline for payment?
Payment is due 14 days after the invoice date, without deduction. Please transfer the amount within that time.
08. What are the options for cancelling?
You can cancel free of charge up to 14 days before the course starts. If you have to cancel at short notice due to illness or other reasons, you have the option of adding a substitute participant or of making up the course at a later date (within 6 months).
09. When will I receive a firm commitment as to whether the course will take place?
You will receive binding confirmation 7 days before the course begins as to whether it will go ahead.
10. How many participants are required for a course to be given/what is the minimum number of participants?
We generally offer courses for 5 or more people. That means that if you would like to book a course at your premises, you need 5 people to register or need to pay the amount for 5 participants, even if fewer people attend.
11. Can I book a course that is given in English?
If you need a course that is officially advertised as given in German to be given in English, please contact us. We will try to make that possible for you.
12. What language is the course in?
Our webinars and online courses are conducted in English. All our F2F training courses are generally conducted in German. Feel free to contact us if you need face-to-face training in English or online training in German.