Menu

Easy Start Embedded PetaLinux

Easy Start


With PetaLinux, AMD offers an open-source Operating System (OS) solution for devices with an Arm® APU or legacy parts when using a MicroBlaze™ processor. AMD complements this with commercial support, documentation, and maintenance.

In the beginning, this workshop teaches fundamentals concerning the usage of an embedded Linux OS. PetaLinux provides prepared configuration scripts for simple kernel configuration, QEMU simulation, numerous templates firmware packing, and documentation. All of these features make it easy for Linux newcomers to configure the kernel, support hardware peripherals, and bring an embedded system up quickly and efficiently along with the user application. In addition, the basics of binding hardware peripherals with their respective driver support is discussed. The board used in the exercises, can be taken home by the participants.

This course includes a Zynq™ SoC evaluation board with example solutions.

Course language: German (English possible on request)

Portrait von Michael Schwarz

Contact

Michael Schwarz

+49 7664 91313-15

michael.schwarz@plc2.de

Details

Applicable technologies

AMD FPGAs and adaptive SoCs,
Kria™ SoMs

Requirements

Basic knowledge of embedded systems, software design and Linux is advantageous
Comfort with the C/C++ programming

Duration

2 days

Fee (net per person)

€ 2,050

Inclusive

AMD evaluation board with example solutions
Training material
Beverages during breaks
Lunch

Agenda

01

Embedded Linux overview

02

PetaLinux for MicroBlaze™ and Arm® APU in Zynq™

03

Build and boot an image

04

Introduction to the PetaLinux tools

05

Application development and debugging

06

Networking and TCP/IP

07

Device drivers, user space I/O, and loadable modules

08

Custom hardware development and interfacing

09

Board bring-up with the Vivado™ Design Suite and PetaLinux tools

10

Custom hardware development

11

Device drivers for the hardware

Dates

Easy Start Embedded PetaLinux

ES

all year on request

Book now

Booking

DE EN

Company

Contact Person

Request / Offer

Billing Address

Billing Person

Participant(s)

Fee

Participant

 

€ 2,050

Course

Easy Start Embedded PetaLinux_ES

Total fee

€ 2,050

*Required field

Unternehmen

Ansprechpartner:in

Anfrage / Angebot

Rechnungsanschrift

Ansprechpartner:in

Teilnehmer:innnen

Kosten

Teilnehmer:in

 

€ 2,050

Kurs

Easy Start Embedded PetaLinux_ES

Gesamtbetrag

€ 2,050

*Pflichtfeld

This might also interest you...

Course Format Category Location Duration Date

Embedded Design with PetaLinux Tools

OL (Online Live)

Embedded

Online

2 days

Mar 11, 2024

Info

Embedded Linux PetaLinux build rootfs kernel driver layer DeviceTree Device-Tree Boot

Embedded Design with PetaLinux Tools

OL (Online Live)

Embedded

Online

2 days

Nov 28, 2024

Info

Embedded Linux PetaLinux build rootfs kernel driver layer DeviceTree Device-Tree Boot

Embedded Design with PetaLinux Tools

WO (Workshop)

Embedded

Stuttgart

2 days

Mar 11, 2024

Info

Embedded Linux PetaLinux build rootfs kernel driver layer DeviceTree Device-Tree Boot

Embedded Design with PetaLinux Tools

WO (Workshop)

Embedded

Frankfurt / Main

2 days

Jun 26, 2024

Info

Embedded Linux PetaLinux build rootfs kernel driver layer DeviceTree Device-Tree Boot

Embedded Design with PetaLinux Tools

WO (Workshop)

Embedded

Berlin

2 days

Sep 11, 2024

Info

Embedded Linux PetaLinux build rootfs kernel driver layer DeviceTree Device-Tree Boot

Embedded Design with PetaLinux Tools

WO (Workshop)

Embedded

Munich

2 days

Nov 28, 2024

Info

Embedded Linux PetaLinux build rootfs kernel driver layer DeviceTree Device-Tree Boot

Compact Embedded Linux

OL (Online Live)

Embedded

Online

3 days

Mar 25, 2024

Info

Embedded PetaLinux Vitis Linux OS Operating System Open Source OSS Driver Application Library Software Kernel Debugging Performance Boot Bootflow elf c c++ c/c++ Device Tree Devicetree Device-Tree Yocto tool flow Zynq SoC

Compact Embedded Linux

OL (Online Live)

Embedded

Online

3 days

Nov 05, 2024

Info

Embedded PetaLinux Vitis Linux OS Operating System Open Source OSS Driver Application Library Software Kernel Debugging Performance Boot Bootflow elf c c++ c/c++ Device Tree Devicetree Device-Tree Yocto tool flow Zynq SoC

Compact Embedded Linux

WO (Workshop)

Embedded

Frankfurt / Main

3 days

Mar 25, 2024

Info

Embedded PetaLinux Vitis Linux OS Operating System Open Source OSS Driver Application Library Software Kernel Debugging Performance Boot Bootflow elf c c++ c/c++ Device Tree Devicetree Device-Tree Yocto tool flow Zynq SoC

Compact Embedded Linux

WO (Workshop)

Embedded

Munich

3 days

Jun 17, 2024

Info

Embedded PetaLinux Vitis Linux OS Operating System Open Source OSS Driver Application Library Software Kernel Debugging Performance Boot Bootflow elf c c++ c/c++ Device Tree Devicetree Device-Tree Yocto tool flow Zynq SoC

Compact Embedded Linux

WO (Workshop)

Embedded

Stuttgart

3 days

Sep 02, 2024

Info

Embedded PetaLinux Vitis Linux OS Operating System Open Source OSS Driver Application Library Software Kernel Debugging Performance Boot Bootflow elf c c++ c/c++ Device Tree Devicetree Device-Tree Yocto tool flow Zynq SoC

Compact Embedded Linux

WO (Workshop)

Embedded

Berlin

3 days

Nov 05, 2024

Info

Embedded PetaLinux Vitis Linux OS Operating System Open Source OSS Driver Application Library Software Kernel Debugging Performance Boot Bootflow elf c c++ c/c++ Device Tree Devicetree Device-Tree Yocto tool flow Zynq SoC

Easy Start Kria for Vision Development

ES (Easy Start)

Embedded

Stuttgart

2 days

May 27, 2024

Info

SOM Vision Vivado Vitis AI Kria Image Processing Vision Kernel Rootfs DeviceTree Device-Tree Embedded mulitmedia camera PetaLinux Linux easy start

Easy Start Kria for Vision Development

ES (Easy Start)

Embedded

Freiburg

2 days

Sep 23, 2024

Info

SOM Vision Vivado Vitis AI Kria Image Processing Vision Kernel Rootfs DeviceTree Device-Tree Embedded mulitmedia camera PetaLinux Linux easy start

Easy Start Kria for Vision Development

ES (Easy Start)

Embedded

Berlin

2 days

Nov 05, 2024

Info

SOM Vision Vivado Vitis AI Kria Image Processing Vision Kernel Rootfs DeviceTree Device-Tree Embedded mulitmedia camera PetaLinux Linux easy start

Easy Start Embedded for Zynq UltraScale+ MPSoC Systems

ES (Easy Start)

Embedded

Stuttgart

2 days

Mar 11, 2024

Info

Embedded Introduction Beginner Overview Zynq MPSoC Embedded Software C C++ Einführung Einstieg bit Bitstream Vivado Vitis AXI Cortex_A53 Cortex-R5 Processor BSP PMU Power IP-Integrator ACE easy start

Easy Start Embedded for Zynq UltraScale+ MPSoC Systems

ES (Easy Start)

Embedded

Frankfurt / Main

2 days

Jul 15, 2024

Info

Embedded Introduction Beginner Overview Zynq MPSoC Embedded Software C C++ Einführung Einstieg bit Bitstream Vivado Vitis AXI Cortex_A53 Cortex-R5 Processor BSP PMU Power IP-Integrator ACE easy start

Easy Start Embedded for Zynq UltraScale+ MPSoC Systems

ES (Easy Start)

Embedded

Berlin

2 days

Oct 15, 2024

Info

Embedded Introduction Beginner Overview Zynq MPSoC Embedded Software C C++ Einführung Einstieg bit Bitstream Vivado Vitis AXI Cortex_A53 Cortex-R5 Processor BSP PMU Power IP-Integrator ACE easy start

Easy Start Embedded for Zynq UltraScale+ MPSoC Systems

ES (Easy Start)

Embedded

Freiburg

2 days

Dec 09, 2024

Info

Embedded Introduction Beginner Overview Zynq MPSoC Embedded Software C C++ Einführung Einstieg bit Bitstream Vivado Vitis AXI Cortex_A53 Cortex-R5 Processor BSP PMU Power IP-Integrator ACE easy start

showing: 1 to 2 (2)

How can we help?

Contact

FAQ

01. Can you help me with reserving the room?

If you need a room for a face-to-face course, please contact us. We will support you in choosing suitable accommodation.

02. What times in the day do courses start and end?

Our face-to-face courses start daily at 9 a.m. (CET/CEST) and end at 5 p.m., with two coffee breaks and an extended lunch break. The total course time per day is 6 hours. For online courses, the start is also at 9 a.m. (CET/CEST), but they end at 2:30 p.m.. The total course time per day is 4 and a half hours plus breaks.

03. Are course materials provided?

All participants of paid courses will receive English training materials in electronic or paper form.

04. Will I receive a course certificate?

Each participant of a paid PLC2 course will receive a signed certificate of attendance at the end of the course.

05. Can I pay with Training Credits (TCs)?

Of course, you can also pay for your training using your available TCs (Training Credits). We will then invoice AMD directly. If you do not have sufficient credit for the booked training, the difference can be paid for with an additional payment. The additional charge will be invoiced directly to you.

06. What are the options for payment?

You can pay us via bank transfer or with TCs (Training Credits). Unfortunately, payment via debit, credit card, or PayPal is not possible.

07. What is the deadline for payment?

Payment is due 14 days after the invoice date, without deduction. Please transfer the amount within that time.

08. What are the options for cancelling?

You can cancel free of charge up to 14 days before the course starts. If you have to cancel at short notice due to illness or other reasons, you have the option of adding a substitute participant or of making up the course at a later date (within 6 months).

09. When will I receive a firm commitment as to whether the course will take place?

You will receive binding confirmation 7 days before the course begins as to whether it will go ahead.

10. How many participants are required for a course to be given/what is the minimum number of participants?

We generally offer courses for 5 or more people. That means that if you would like to book a course at your premises, you need 5 people to register or need to pay the amount for 5 participants, even if fewer people attend.

11. Can I book a course that is given in English?

If you need a course that is officially advertised as given in German to be given in English, please contact us. We will try to make that possible for you.

12. What language is the course in?

Our webinars and online courses are conducted in English. All our F2F training courses are generally conducted in German. Feel free to contact us if you need face-to-face training in English or online training in German.